Name: The Barbara Clare

Year of build:2007

HIN: GB-NYY00302E707

Builder: Northshore Yachts

Designer: Humpreys Yacht Design /Northshore

Dimensions

Length Overall            10.82M            35ft 6 ins

Lengths Waterline      9.22M              30 ft 3 ins

Beam                           3.57M              11 ft 10 ins

Draft, keel up              0.72M              2 ft 4 ins

Draft, keel down          2.18M              7 ft 2 ins

Displacement              6,980Kg           15,388 lbs

Ballast weight             2,205Kg           4.455 lbs

Keel weight                 1,050Kg           2,310 lbs

Total Ballast                3,255Kg           6,765 lbs

Air Draft                      16.50M            54 ft 2 ins

Fuel tank                     182L                40 Gal

Water tank                  205L                45 Gal

Holding tank                60L                  12.5 Gal

Hull Construction
Heavy duty GRP Moulding, hand laid to Northshore Nordseal laminating system incorporating multi-axial and unidirectional reinforcements. Thickness increases progressively towards the keel area. The keel box is an integral part of the hull lay-up and sandwich construction stiffening runs the entire length of the hull topsides. All main bulkheads are bonded into the hull.
Gelcoat colour: LR25113 Southerly Blue
Boot top stripes: Off White 3969
Style lines: Off White
Underwater finish: Clear gelcoat / Antifoul

Deck Construction
Hand laid GRP. Sandwich type construction using balsa core stiffening , with marine plywood in high stress areas where fittings are positioned. Heavily stressed areas are additionally reinforced with unidirectional glass reinforcement, The deck is bonded to the hull through the entire length and to all main bulkheads resulting in a  strong an integrated unit. Teak cappings are used to cover the hull to deck joint upstand
Gelcoat colour: Off White 3969
Ring deck: Teak laid

Swing Keel
The fixed ballast is an iron casting which acts as a grounding plate and as transverse stiffening for the keel unit. It is fitted into a recess in the hull in the area of the keel box with stainless steel bolts. The aerofoil swing keel is cast iron and incorporates a stainless steel pivot at the leading edge. The swing keel is raised and lowered by a hydraulic ram powered by an electrically driven pump with a manual back up. All hydraulics are easily accessible for maintenance. A keel control panel and gauge showing keel position is fitted at the wheel pedestal. A removeable stainless steel pin positioned to enable the keel to be locked in the “UP” position.

Engine
Yanmar 3YM30 21.3kW (30hp) 3 cylinder fresh water cooled diesel engine
Reduction/reverse gear
60 amp alternator
Bronze stern tube with water lubricated stern gland
Stainless steel propeller shaft
Bronze three bladed propeller
Substantial skeg fitted on centreline to protect propeller and rudders when yacht is dried out
Non-metallic fuel tank under cabin sole below chart table – capacity 182 litres/40 gallons, with sediment trap and line filter
Non-metallic water strainer with removeable filter
12V electric ventilator
Sound deadening to engine box
Hinge up panels at either end of engine box for access
Engine box can be completely removed for maintenance.

Electrics
12 Volt system
Two heavy duty batteries charged from engine alternator, one for engine, one for domestic use (new 2019
Sterling battery charger 30amp
Isolating switches
Cabin lighting throughout
Reading lights over bunks
Chart light over navigation table
Full navigation light system, incorporating bow light, stern light, masthead tricolour light with all round white anchor light, deck flood light and steaming light.
Circuit breakers on main panel
12V interior socket, cigarette lighter type, fitted to navigation area
240v Ring main, with 3 double outlet sockets, earth leakage circuit breaker and connection cable with plug for shore connection
1kW Immersion heater fitted to engine calorifier
Honda 500 portable generator

Navigation and Electronics:
Garmin chart plotter
Echomax radar reflector
Garmin fish finder C160
ICOM VHF handset and charger station
Entel VHF hand set, desk charger and 12V battery charger
2 x Cobra VHF marine handsets and 12V chargers
Ball and cone set
Gundig radio/CD player with cockpit speakers

Engineering
Holding tank system for heads. Heads pumps to sea or tank.

Water system and pumps
Pressurised hot and cold water system
Mixer tap to galley sink
Mixer tap in heads compartment
Non-metallic water tank under aft end of dinette – Capacity 205 litres/45 gallons
Hot water provided by engine calorifier unit
Electric sump pump to shower tray
One manual bilge pump
One electric submersible bilge pump

Steering
Semi balanced twin rudders
Pedestal mounted stainless steel cockpit wheel
Lewmar/Whitlock Cobra steering system
Single lever engine control
Emergency steering system
6” main steering compass and compass guard

Spars and rigging
Selden masthead rig
Double swept back spreaders
Selden anodised aluminium spars finished in silver
Internal halyards
1 x 19 stainless steel wire standing rigging with swage toggle fork chrome bronze rigging screws
Backstay with manual jib
Furlex headsail reefing system
Single line reefing led to aft cockpit for mainsail
Solid kicker
Kicker, main halyard, topping lift, outhaul and 2 reefs lead aft
Genoa halyard at mast
Burgee and signal halyards
Sail control lead aft across pilot house
Lewmar size 8 winch on mast

Sails
Dacron sails
Self tacking furling jib
Mainsail with four battens and mast sliders (bottom batten missing)
Mainsail cover in CJ Marine red canvas (renewed in 2018)

Cockpit
Aft cockpit
Self draining
Teak laid to cockpit seats
Teak laid to cockpit sole
Good access aft for boarding through transom
Telescopic stern boarding ladder
Large cockpit locker to port
Gas bottle stowage in cockpit locker to starboard
Cave locker in starboard cockpit coaming
Sliding acrylic companionway hatch with washboard
Companionway security bar
Instrument panel above hatchway
Two winch handle pockets
Steering pedestal
Two safety harness eyes
Spray hood with stainless steel frame, canvas renewed in 2018 by CJ Marine in red
Cockpit enclosure with stainless steel frame, canvas renewed in 2018 by CJ Marine in red

Deck fittings & loose gear
Cleats forward and aft raised
Spring cleats amidships with stainless steel chafe guard
Fairleads aft
Stainless steel stemhead fitting with twin bow roller
GRP foredeck anchor locker with reinforced shelf for anchor windlass
Anchor windlass with remote control
Stainless steel pulpit incorporating navigation light bracket
Stainless steel stanchions and guardwires, with gates port and starboard
Stainless steel pushpit incorporating teak seating, stern gate, navigation light bracket and ensign socket
Fuel and water deck fillers
Self tacking foresail track with sheet to cockpit
Turning blocks to take reefing lines
Mainsheet track with control lines leading aft to cockpit
Clutches on each side for running rigging
Two Lewmar 40ST winches
Stainless steel grab handles on either side of the coachroof
15 Kg claw anchor
10 Metres of chain
30 Metres of rope warp
6 Fortress anchors
Two fire extinguishers
One fire blanket
8 Fenders with tails
Ball fender -new
Rigid lifebuoy with rope
2 Mooring warps
2 Boat hook
1 Ensign and staff
Foghorn and 2 cannisters
Sea Magnet
Fortress anchor FX16
Fortress anchor FX7
First aid boxes
Small folding kedge anchor
Deck lifelines
2 x harnesses for lifelines
Bosuns chair, in bag
Sporty Yak 245 dinghy
Man overboard rescue sling

Windows, hatches and ventilation
Size 60 opening deck hatch over forecabin
Two size 00 opening hatches to galley and heads
Two size 20 opening hatches to saloon and navigation area
Two size 1 glazed opening ports in cockpit to serve aft cabin
Two dorade ventilators on deck serving saloon and navigation area
Fixed ventilator to heads
Acrylic sliding companionway hatch
Pilothouse windows and hull ports are partially reflective toughened glass bonded into recessed in the GRP mouldings

Internal joinery and upholstery
Internal joinery is finished in solid wood with faced marine quality plywood
Linings are fabric covered plywood and GRP moulding as appropriate
Cabin soles are teak striped non-slip laminates
Joinery: Teak
Galley worktop: Corian type - Gemini
Heads worktop: Nordstone - White
Saloon upholstery: Foxtrot Fox 31 Signal
Curtains: JAB Fresco 1-6145-476
Concertina blinds fitted to raised saloon windows